Tecnoflon^® PL 958

Tecnoflon^® PL 958 is a new generation low post cure peroxide curable fluoroelastomer. Tecnoflon^® PL 958 exhibits both excellent low temperature flexibility (TR10 = –24°C) and an outstanding resistance to a variety of chemicals. As all other Tecnoflon^® peroxide curable grades, it exhibits excellent processability; moreover it needs very short post-curing cycles. Tecnoflon^® PL 958 is a higher viscosity version of Tecnoflon^® PL 458: please refer to Tecnoflon^® PL 458 Technical data sheet for data on chemical resistance.

Some of the basic properties of Tecnoflon^® PL 958 are:

• Excellent low temperature flexibility

• Low volume swell in methanol-based fuels

• Low post cure

• Superior mold flow

• Lack of mold fouling

• Excellent mold release

Tecnoflon^® PL 958 can be used for compression, injection-compression and transfer molding of O-rings, gaskets and seals. Tecnoflon^® PL 958 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two roll mills or internal mixers. Tecnoflon^® PL 958 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods may be produced by a variety of rubber processing methods.