Tecnoflon^® N 535

Tecnoflon^® N 535 is a low viscosity fluoroelastomer copolymer. Tecnoflon^® N 535 is intended as a general purpose fluoroelastomer. It can be blended with other polymers of the Tecnoflon^® family to meet specific requirements. Tecnoflon^® N 535 does not contain curatives: therefore the proper levels of VANAX^® FC-20 Granules and VANAX^® FC-30 Granules must be added to achieve the required properties. It can be also cured with diamine based systems.

Some of the unique properties of Tecnoflon^® N 535 are:

• Excellent compression set

• Lack of mold fouling

• Superior extrusion behavior

• Superior mold flow

• Excellent mold release

Tecnoflon^® N 535 can be used for injection and transfer molding of O-rings, gaskets and seals. Tecnoflon^® N 535 can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two roll mills or internal mixers. Compounds based on Tecnoflon^® N 535 can be dispersed in solvents for coating applications. Tecnoflon^® N 535 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.