Phosphorus Compounds

MOLYVAN® L Friction Reducer

MOLYVAN L is an oil-soluble organic molybdenum additive containing sulfur and phosphorus. It functions as friction reducer, antioxidant, antiwear, and E.P. agent. It is used in engine oils, metalworking compositions and in a variety of industrial and auto-motive lubricating oils, greases and specialties. MOLYVAN L is an outstanding antiwear agent. It is quite useful in automotive and industrial gear oils and greases which operate under heavy load conditions. Note: Since oil formulations vary it is recommended that upon the incorporation of any additive the finished product be tested to confirm original test results. In some formulations, the presence of MOLYVAN L may contribute to copper corrosion which would be detrimental to some diesel engines. Therefore, its use in such lubricants is not recommended.

VANLUBE® 9123 Lubricant Additive

NSF® Certified: HX-1, HX-2, 135575 - Laboratory evaluations show VANLUBE 9123 to be an excellent antiwear additive and rust inhibitor in a wide range of industrial oils and lubricating greases. VANLUBE 9123 can be used at levels up to 0.5% mass to formulate food-grade products complying with 21 CFR section 178.3570, "Lubricants with Incidental Food Contact."

VANLUBE® 622 Lubricant Additive

Antiwear and EP additive for steel mill and other industrial gear oils. Antiwear and extreme pressure additive for petroleum oils and greases. VANLUBE 622 has outstanding extreme pressure and antiwear properties in a variety of base lubricants. It will give unusually high Timken, Falex, and 4-Ball EP values at economical concentrations of 1 to 3%. It shows promise as an EP and antiwear additive in automotive gear oils. Radioactive Ring Wear Tests in crankcase oils show VANLUBE 622 to be superior to zinc dithiophosphates at equivalent treating costs. Friction reducer in engine oils and gear oils.

VANLUBE® 7611M Lubricant Additive

NSF® Certified: HX-2, 136048 - VANLUBE 7611M is an organic liquid additive containing sulfur and phosphorus. 4-Ball Wear tests show VANLUBE 7611M, at 20 kg load, is equivalent to typical zinc dialkyldithiophosphates. At 40 kg load, it is superior to these products. VANLUBE 7611M will improve the antiwear properties of sulfurized extreme pressure additives. It is a useful component for EP/antiwear lubricant formulations and additive packages. VANLUBE 7611M does not contain metallic elements. Thus, it is applicable to ashless and low ash formulations.

VANLUBE® 727 Lubricant Additive

Laboratory bench tests indicate the versatility of VANLUBE 727 as an additive for various types of automotive and industrial lubricating oils. VANLUBE 727 functions as an antiwear agent and antioxidant. The fact that it is nonmetallic makes it of interest for ashless or low-ash applications. Some suggested areas of application are: automotive engine oils, railroad diesel oils, compressor oils, gas engine oils, antiwear hydraulic and turbine oils, and various types of industrial oils. Bench tests indicate that the performance of VANLUBE 727 is competitive with that of commonly used zinc dithiophosphates. One percent in SAE 90 gear oil gives a 12-stage pass in the FZG test.

VANLUBE® 719 Lubricant Additive

VANLUBE 719 was developed primarily for steel mill and similar industrial gear oils. It gives good extreme pressure and antiwear properties, good high temperature stability, and good demulsibility. VANLUBE 719 at a concentration range of 2 to 3% will meet the requirements of most steel mill gear oil specifications. It is applicable to 2-cycle engine oils.

VANLUBE® 692 Lubricant Additive

Used in nonmetallic industrial gear oils to give high load carrying properties. Extreme pressure and antiwear additive for lubricants based on petroleum oils and synthetics. VANLUBE 692 enhances the extreme pressure properties of sulfurized olefins, chlorinated paraffins, dithiocarba-mates and phosphorodithioates.

VANLUBE® 672 Lubricant Additive

An extreme pressure and antiwear additive for industrial lubricants, including lubricating oils, greases and synthetic fluids. Used as an extreme pressure and antiwear additive in various metalworking lubricants such as drawing, stamping and forming compounds. Improved EP performance of conventional extreme pressure materials such as sulfurized olefins, fatty oils, chlorinated paraffins, metal dithiocarbamates and phosphorodithioates. Effective in low concentrations as an antiwear additive in synthetic lubricants.

VANLUBE® 407 Lubricant Additive

VANLUBE® 407 Lubricant Additve is a liquid blend of octylated phenyl-alpha-naphthylamine with other proprietary antioxidants. This unique combination provides exceptional antioxidant performance in PDSC (ASTM D6186) and RPVOT (ASTM D2272) at very low treat rates. VANLUBE 407 is approved by NSF for use in USDA HX-1 food grade lubricants with incidental food contact.

VANLUBE® 672E Lubricant Additive

An extreme pressure and antiwear additive for industrial lubricants, including lubricating oils, greases and synthetic fluids. Used as an extreme pressure and antiwear additive in various metalworking lubricants such as drawing, stamping and forming compounds. Improved EP performance of conventional extreme pressure materials such as sulfurized olefins, fatty oils, chlorinated paraffins, metal dithiocarbamates and phosphorodithioates. Effective in low concentrations as an antiwear additive in synthetic lubricants.
Find the Additives You Need

Find the Additives You Need

Superior Performance in Demanding Applications- Read through our Quick-Scan Application/Function Guide to find the right additive for the job. Lubricant Additive Brochure International Version Lubricant Additive Brochure Chinese Version Lubricant Additive Brochure Russian Version
Open our Lubricant Additives Brochure
Categories